D-JRJ AIRCONDITIONING SERVICES
Pandi, Bulacan
Aircon repairAircon cleaningAircon installationAircon maintenance
Service guide · Philippines
Aircon Installation Services in the Philippines.
Installation covers mounting the indoor and outdoor units, running the copper tubing and drain line, electrical connection, and a cooling test. A clean install matters more than the brand. Correct sizing, bracket height, and pipe length affect cooling, noise, and how often the unit needs repair later.
825
Directory listings
31
Provinces with providers
₱700
Indicative low
₱14,000
Indicative high
What is included
- Site survey and sizing
- Wall or window bracket mounting
- Copper pipe and insulation
- Drain line and slope
- Electrical connection and breaker
- Vacuum and leak test
- Test run and turnover
Signs you need this service
- A new unit is still boxed and waiting
- You are moving to a new home
- An old unit is being replaced
- A room needs a second unit
- A renovation added a new room
The process, step by step
- Site check and sizing. The technician measures the room, checks heat sources, and confirms the electrical capacity. Unit size is matched to the room, not chosen by price alone.
- Quotation and schedule. The quote should list the unit, bracket, piping, breaker, labor, and any wall or ceiling work. Ask what is excluded before paying a deposit.
- Mounting and pipe run. The indoor and outdoor units are mounted, and the copper lines are run with insulation and proper support. Drain slope is checked so water does not pool.
- Vacuum and electrical. The line set is vacuumed to remove moisture and tested for leaks. The unit is connected to its own breaker with the correct wire size.
- Test and turnover. The unit runs through a cooling cycle, and the technician checks airflow, drain, noise, and remote functions. Keep the manual, warranty card, and receipt.
Price table
What the job costs
Indicative Philippine market ranges by unit type. These are not quotes from any listing.
| Unit type | Indicative low | Indicative high | Notes |
|---|---|---|---|
| Window type | ₱700 | ₱1,500 | Labor and bracket only, unit not included. |
| Split type, 0.8 to 1.5 HP | ₱2,500 | ₱4,500 | Standard back to back pipe run. |
| Split type, 2.0 to 3.0 HP | ₱4,000 | ₱7,000 | Larger piping and higher electrical load. |
| Cassette or multi split | ₱7,000 | ₱14,000 | Ceiling work and longer pipe runs add cost. |
| Removal and relocation | ₱1,500 | ₱3,500 | Includes recovery of refrigerant and reinstallation. |
Repair or replace?
- A poor installation can look like a repair problem later.
- If the old unit needs a compressor and a new install, compare both quotes.
- Reuse existing brackets and piping only after a leak and condition check.
- Ask whether the quote includes the bracket, breaker, and pipe.
How to use the quote
Ask the technician to write the diagnosis, the parts to be replaced, the refrigerant to be used, and the labor charge as separate lines. A quote that only gives one total is hard to compare and easy to inflate.
For a major part, ask whether it is new, rebuilt, or surplus. Confirm the warranty in writing. If the shop cannot explain why the part failed, get a second opinion before approving the work.
Province links
Aircon Installation by province
Provinces with listings that mention this service. Each link opens the full local directory.
Providers
Shops with this service on record
A sample of complete records. Use a province page for the full local list.
JV Aire Airconditioning Services Inc. (Aircon installation, cleaning, repair, mechanical works)
Parañaque, Metro Manila
Aircon repairAircon cleaningAircon installationAircon maintenance
Aircon cleaning, Aircon repair
Las Piñas, Metro Manila
Aircon repairAircon cleaningAircon installationAircon maintenance
Air Prosystems Inc.
Davao City, Davao del Sur
Aircon repairAircon cleaningAircon installationAircon maintenance
Parts & Materials Xchange Corp.
Davao City, Davao del Sur
Aircon repairAircon installationAircon maintenanceParts and supply
Castle-Aire Cebu - Air Conditioning Cleaning, Freon & Contracting
Cebu City, Cebu
Aircon repairAircon cleaningAircon installationAircon maintenance
Lang 72 Degrees Air Conditioning Services
Mandaue, Cebu
Aircon repairAircon cleaningAircon installationFreon recharge
iCAS - Iloilo Cool Air System
Iloilo City, Iloilo
Aircon repairAircon cleaningAircon installationParts and supply
Aircon Installation: common questions
How long does aircon installation take?
A window unit takes about one to two hours. A standard split unit takes three to five hours, depending on pipe length and wall access. Cassette or multi split systems can take a full day or more. Ask whether the schedule includes electrical work and cleanup.
Is installation included in the price of a new unit?
Usually not. Most appliance stores sell the unit with a basic installation package, but extra piping, brackets, breakers, and wall work are charged separately. Read the inclusion list before buying. A low unit price with a vague install quote often ends up costing more.
Do I need a permit or HOA approval for a split aircon?
Many condominiums and subdivisions require approval before drilling walls or mounting an outdoor unit. Ask your building admin about bracket placement, drain routing, and noise rules. Keep the approval and the installer's contact details. Some buildings require a licensed installer and a certificate of insurance.
How long can the copper pipe be?
It depends on the model, but many residential split units allow around 5 to 15 meters of pipe. Longer runs reduce capacity and need additional refrigerant. The installer should follow the manual, not simply extend the line. Ask for the limit of your specific unit.
Can I install a split aircon myself?
It is not a good idea unless you have the tools and training. Installation needs a vacuum pump, manifold gauges, and electrical knowledge. A poor vacuum or a loose flare joint leads to leaks and early compressor failure. The warranty may also be voided by a non accredited installation.
Related services
Keep reading
Aircon Maintenance
Aircon maintenance is preventive care that combines cleaning with inspection and testing. It catches loose wiring, dirty coils, weak airflow, and small refrigerant leaks before they become repairs. Most homes need it every six months. Maintenance keeps a working unit efficient, but it cannot fix a failed part.
Split Type Aircon Repair
Split systems have an indoor and an outdoor side. Indoor faults show as weak airflow, water leaks, or noise. Outdoor faults show as no cooling, tripping, or a hot compressor. Diagnosis checks both sides before parts are replaced. Typical repairs cover the PCB, fan motor, sensors, drain pump, and compressor.
Window Type Aircon Repair
Window units are simple and usually repairable. Common faults are a dirty filter, a failed capacitor, a weak fan motor, a clogged drain, a thermostat problem, or a failing compressor. A technician can test the unit on site and quote before any part is replaced. Most repairs take under a day.