Skip to content
Aircon Repair Locator
Menu

Service guide · Philippines

Aircon Cleaning Services in the Philippines.

Aircon cleaning removes dust, dirt, and mold from the filters, coils, blower, and drain line. It is routine upkeep, not a repair, and usually takes one to two hours per unit. Most homes in the Philippines book a cleaning every six months, or every three months if the unit runs daily near traffic or dust.

825

Directory listings

30

Provinces with providers

₱600

Indicative low

₱4,000

Indicative high

What is included

  • Filter removal and washing
  • Evaporator coil cleaning
  • Blower and fan cleaning
  • Drain pan and line flush
  • Condenser coil rinse
  • Cooling check after cleaning

Signs you need this service

  • Visible dust on the filters
  • Weak airflow from the vents
  • Musty or damp smell
  • Water dripping from the indoor unit
  • Higher electricity bill than usual

The process, step by step

  1. Book and prepare. Tell the technician the unit type, horsepower, and floor level. Clear space around the indoor and outdoor units and make sure a power outlet and water source are reachable.
  2. Inspect and protect. The technician tests the unit before starting and covers the floor, furniture, and wall with drop cloths. Any existing damage is noted so it is not blamed on the cleaning.
  3. Clean the indoor unit. Filters are washed, the evaporator coil and blower are cleaned, and the drain pan and line are flushed. A chemical wash is added only when buildup is heavy.
  4. Rinse the outdoor unit. The condenser coil is rinsed and checked for blocked airflow. The area around the outdoor unit is cleared so it can release heat properly.
  5. Reassemble and test. The unit is put back together and run for several minutes. The technician checks airflow, cooling, drain flow, and noise before turning the unit back to you.

Price table

What the job costs

Indicative Philippine market ranges by unit type. These are not quotes from any listing.

Indicative market range, PHP
Unit typeIndicative lowIndicative highNotes
Window type₱600₱1,000Standard cleaning, usually completed in under an hour.
Split type, 0.75 to 1.5 HP₱1,200₱1,800Includes indoor and outdoor unit cleaning.
Split type, 2.0 to 3.0 HP₱1,800₱2,600Larger coils and longer service time raise the rate.
Cassette or floor mounted₱2,500₱4,000Ceiling access and panel removal add labor.
Chemical deep clean add-on₱800₱1,500Recommended for mold, grease, or years of buildup.

Repair or replace?

  • Cleaning is maintenance, so it rarely decides repair versus replacement.
  • If cooling returns after cleaning, no repair is needed yet.
  • Weak cooling that survives a cleaning points to refrigerant or compressor trouble.
  • Ask for a repair quote before agreeing to replace a unit.

How to use the quote

Ask the technician to write the diagnosis, the parts to be replaced, the refrigerant to be used, and the labor charge as separate lines. A quote that only gives one total is hard to compare and easy to inflate.

For a major part, ask whether it is new, rebuilt, or surplus. Confirm the warranty in writing. If the shop cannot explain why the part failed, get a second opinion before approving the work.

Province links

Aircon Cleaning by province

Provinces with listings that mention this service. Each link opens the full local directory.

National directory

Providers

Shops with this service on record

A sample of complete records. Use a province page for the full local list.

JV Aire Airconditioning Services Inc. (Aircon installation, cleaning, repair, mechanical works), aircon services in Parañaque, Metro Manila

JV Aire Airconditioning Services Inc. (Aircon installation, cleaning, repair, mechanical works)

Parañaque, Metro Manila

Aircon repairAircon cleaningAircon installationAircon maintenance

Aircon Cleaning: common questions

How often should I have my aircon cleaned?
For most homes, every six months is enough. Book every three to four months if the unit runs daily, sits near a busy road, or serves a kitchen or pet area. In dusty locations, check the filter monthly and wash it yourself between professional cleanings. A unit that smells musty needs attention sooner.
How long does an aircon cleaning take?
A window unit usually takes 30 to 60 minutes. A split unit takes one to two hours, and a cassette or multiple units can take half a day. Heavy mold, poor access, or a clogged drain line can add time. Ask for a time estimate when you book.
What is the difference between regular and chemical cleaning?
Regular cleaning uses water, brushing, and mild soap on accessible parts. Chemical cleaning uses a coil cleaner to lift grease, mold, and hardened dirt from the evaporator and blower. Chemical cleaning costs more and is worth it when the unit smells bad or has not been opened in years.
Can cleaning fix an aircon that is not cooling?
Sometimes. A clogged filter or coil can restrict airflow and make cooling feel weak. If the unit still blows warm air after a thorough cleaning, the cause is likely refrigerant, a sensor, or the compressor. A technician should test those before quoting a repair.
What should I prepare before the technician arrives?
Clear breakable items and furniture below the indoor unit. Make sure the outdoor unit is reachable and not blocked by plants or stored goods. Keep a pail and water source available, and secure pets. If the unit is still under warranty, ask whether cleaning by an outside technician affects it.

Related services

Keep reading